|
|
推荐一个玩材料的网站：
http://www.georgevandervoort.com/
George F. Vander Voort，ASM-Metals-Handbook金属手册就是该老爷子主导的，绝对的领域巨擘。
怎么发现的呢？“直观学机械”公众号推送了好几组彩色金相图，于是被水印引导到“材易通”公众号，这个公众号很棒，但是右下角的水印很不爽，继续找，找到了原作者George F. Vander Voort，还有同名网站，既http://www.georgevandervoort.com/，翻了翻，好多专项有PDF的文档供下载，高清原版大图，就此找到，这不，都被我搬了下来，通宵搬了一晚上，目录做了简单翻译，不准，各位大侠帮检查检查，汉译目录用来索引，让索引更精准一点。
链接：https://pan.baidu.com/s/15fsQT21hIjmKQ-2tvk9hrQ
提取码：gje5
关联
金属圣经 金属手册 英汉参照看 祝大家新年快乐！
http://www.jixietop.cn/forum.php ... &tid=2084&fromuid=1
(出处: 中国机械荟萃山庄)
◆01 METALLOGRAPHY GENERAL - 通用金相学 [打开]
├┈01 Metallographic Examination of Welds 焊缝金相检验.pdf
├┈02 What is Metallography 金相学是什么.pdf
├┈03 Understanding Heat Treatment Results Using Metallography 由金相理解热处理结果 - Version 2 版本2.pdf
├┈04 Understanding Heat Treatment Results Using Metallography 由金相理解热处理结果 - Version 1 版本1.pdf
├┈05 Thermal Spray Metallography for the 21st Century 21世纪热喷涂金相学.pdf
├┈06 The SEM as a Metallographic Tool 散射电子图像作为金相分析工具.pdf
├┈07 Solidification Structures 固化结构.pdf
├┈08 Safety in the Metallography Lab 金相实验室安全.pdf
├┈09 Preparation of Ceramics, Cermets, Nitrides, Borides and Sintered Carbides 陶瓷、金属陶瓷、氮化物、硼化物和烧结碳化物的制备.pdf
├┈10 Microstructures of Hot and Cold Worked Metals and Alloys 冷加工、热加工的金属、合金的微观组织.pdf
├┈11 Microstructures of Alloys Used in Medical Devices 用于医疗器械的合金的微观结构.pdf
├┈12 Microstructure, Its Evolution 微观结构的进化.pdf
├┈13 Microstructure of Nonferrous Alloys 有色金属合金的微观结构.pdf
├┈14 Microindentation Hardness Testing 微观硬度压痕试验 - Presentation.pdf
├┈15 Microindentation Hardness Testing 微观硬度压痕试验 - Pape.pdf
├┈16 Microindentation Hardness Testing 微观硬度压痕试验 - Article.pdf
├┈17 Metallography of Welds 焊缝金相学.pdf
├┈18 Metallography of Precious 贵金属金相学.pdf
├┈19 Metallography and Microstructures of Stainless Steels and Maraging Steels 不锈钢和马氏体时效钢的金相组织和显微组织.pdf
├┈20 Heat Metallography and Microstructures of Heat-Resistant Alloys 耐热合金的金相和显微组织.pdf
├┈21 Metallographic Specimen Preparation for Electron Backscattered Diffraction 电子背散射衍射金相试样的制备.pdf
├┈22 Metallographic Preparation of Orthopedic Medical Devices 骨科医疗器械的金相制备.pdf
├┈23 Metallographic Preparation of Medical Devices 医疗器械的金相制备.pdf
├┈24 Low-Load Vickers Microindentation Hardness Testing 低负荷维氏显微压痕硬度试验.pdf
├┈25 Light Microscopy 光学显微学.pdf
├┈26 Introduction to Metallography 金相学概论.pdf
├┈27 Influence of Specimen Preparation on SEM Images and Comparison to LOM Images 试样制备对SEM图像的影响及与LOM图像的比较.pdf
├┈28 Etching to Reveal Microstructure 蚀刻的微观显示结构.pdf
├┈29 Equilibrium Phase Diagrams 平衡相图 PhaseDiagrams.pdf
├┈30 Deformation Determined by Electron Backscatter Diffraction (EBSD) 电子背散射衍射(EBSD)测定形变.pdf
├┈31 Ceramic Preparation 陶瓷的制备.pdf
├┈32 Advances in Metallography 金相学的进步.pdf
├┈33 A Layman's View of Plasma Spray Coating Metallography 等离子喷涂涂层金相学的外行人观点.pdf
├┈33 A Layman's View of Plasma Spray Coating Metallography.pdf
◆02 METALLOGRAPHY GENERAL - ARCHEOMETALLURGY 通用金相学-古冶金学 [打开]
├┈01 Characterizing Iron Based Historical Specimens 铁基历史标本的特征研究 - Struers.pdf
├┈02 Characterizing Iron Based Historical Specimens 铁基历史标本的特征研究 - Buehle.pdf
├┈03 Microstructure of Historical Iron-Based Objects 铁基物体的历史微观机构.pdf
├┈04 Microstructure of Historical Objects – Copper-Based Alloys 铜基合金的历史微观结构.pdf
◆03 METALLOGRAPHY GENERAL - COLOR 通用金相学-颜色 [打开]
├┈01 Color Metallography 彩色金相学 - Paper.pdf
├┈02 Color Metallography from Microscopy Today 今天的彩色金相显微镜学.pdf
├┈03 Color Metallography 彩色金相学 - Volume 9 第9卷.pdf
├┈04 Color Tint Etching 蚀刻色彩化.pdf
├┈Color Metallography from Microscopy Today.pdf
◆04 METALLOGRAPHY GENERAL - EBSD 通用金相学- 电子背散射衍射EBSD [打开]
├┈01 Mechanical Specimen Preparation for EBSD - Buehle 电子背散射衍射的机械试样制备 - Buehler.pdf
├┈02 Mechanical Specimen Preparation for EBSD 电子背散射衍射的机械试样制备 - Struers.pdf
├┈03 Metallographic Specimen Preparation for Electron Backscattered Diffraction 电子背散射衍射金相试样的制备 - Part 1.pdf
├┈04 Metallographic Specimen Preparation for Electron Backscattered Diffraction 电子背散射衍射金相试样的制备 - Part 2.pdf
├┈05 Specimen Preparation for Electron Backscattered Diffraction 电子背散射衍射试样的制备 - Buehler.pdf
├┈06 Specimen Preparation for Electron Backscattered Diffraction 电子背散射衍射试样的制备 - Poster.pdf
├┈07 Specimen Preparation for Electron Backscattered Diffraction 电子背散射衍射试样的制备 - Struers.pdf
├┈08 Vibratory Polishing of High-Purity Metals to Improve EBSD Results 对高纯金属进行振动抛光，提高EBSD效果 - Poste.pdf
◆05 METALLOGRAPHY GENERAL - IRON AND STEEL 通用金相学-钢铁 [打开]
├┈01 Etching Isothermally Treated Steels 蚀刻等温处理钢.pdf
├┈02 Imaging Phases in Steels 钢的成像阶段.pdf
├┈03 Martensite & Retained Austenite - (Article) 马氏体和残余奥氏体-(文章).pdf
├┈04 Metallographic Characterization of the Microstructure of Tool Steel 工具钢微观结构的金相表征_最长.pdf
├┈05 Metallographic Characterization of the Microstructure of Tool Steels工具钢微观结构的金相表征.pdf
├┈06 Metallographic Techniques for Tool Steels 工具钢金相技术 Vol9 MetalsHandbook.pdf
├┈07 Metallography of Stainless Steel and High Temperature Alloy Fasteners 不锈钢和高温合金紧固件的金相检验.pdf
├┈08 Microstructure of Ferrous Alloys 铁合金微观结构.pdf
├┈09 Microstructure of Stainless Steels 不锈钢微观结构.pdf
├┈10 Microstructure of Surface Treatments, Platingsd and Coatings 表面处理、板材和涂层的微观结构.pdf
├┈11 Preparation and Characterization of Surface Treated and Coated Steels 表面处理和涂层钢的制备和表征.pdf
├┈12 Use of Selective Etchants to Identify Carbides in Steel 使用选择性蚀刻剂来鉴别钢中的碳化物.pdf
├┈13 Understanding and Measuring Decarburization 脱碳的理解和测量.pdf
◆06 METALLOGRAPHY GENERAL - METEORITES 通用金相学-陨石 [打开]
├┈01 Metallographic Techniques for Iron Meteorites 铁陨石金相分析技术.pdf
├┈02 Metallography of Iron Meteorites 铁陨石的金相研究.pdf
├┈03 Microstructure of Fe-Ni Meteorites Fe-Ni陨石的微观结构.pdf
◆07 METALLOGRAPHY GENERAL - NICKEL ALLOYS 通用金相学-镍合金 [打开]
├┈01 Metallographic Techniques for Superalloys 高温合金金相技术.pdf
├┈02 Metallography of Superalloys 高温合金金相.pdf
├┈03 Microstructure of Nickel, Cobalt and their Alloys 镍、钴及其合金的微观结构.pdf
◆08 METALLOGRAPHY SPECIFIC 专用金相学 [打开]
├┈01 Indium Based Solders 铟基焊料.pdf
├┈02 Metallography of Titanium and Its Alloys 钛及其合金的金相学.pdf
├┈03 Microstructure of Copper and Copper Alloys 铜和铜合金的微观结构.pdf
├┈04 Microstructure of Magnesium and Its Alloys 镁及其合金的微观结构.pdf
├┈05 Microstructure of Titanium and Its Alloys 钛及其合金的微观结构.pdf
├┈06 Pb-Sn and Pb-Free Solders Pb-Sn和Pb-Free焊料微观结构.pdf
├┈07 Pb-Sn Phase Diagram Pb-Sn相图.pdf
├┈08 Picric Acid – Hazards and Safe Usage 苦味酸的危害和安全使用.pdf
├┈09 Preparation of Composites with Al Matrix 铝基复合材料的制备.pdf
├┈10 Sn-Based Solders 锡基焊料.pdf
├┈11 The Aluminum-Silicon Phase Diagram and Eutectic Modifications 铝硅相图与共晶修饰.pdf
◆09 METALLOGRAPHY SPECIFIC - ALUMINUM 专用金相学-铝 [打开]
├┈01 Metallographic Etching of Aluminum and its Alloys 铝及其合金的金相蚀刻.pdf
├┈02 Microstructure of Cast and Wrought Aluminum Alloys 铸造和锻造铝合金的微观组织.pdf
├┈03 The Al-Si Phase Diagram and Eutectic Modifications Al-Si相图及共晶修饰.pdf
├┈04 Using Microstructural Analysis to Solve Practical Problems 运用微观结构分析方法解决实际问题.pdf
◆10 METALLOGRAPHY SPECIFIC - IRON AND STEEL 专用金相学- 钢铁 [打开]
├┈01 Examples of Duplex Stainless Steels 双相不锈钢的例子.pdf
├┈02 Metallographic Procedures for Cast Irons 铸铁的金相检验程序.pdf
├┈03 Microstructural Characterization of Carburized Steels 渗碳钢的微观结构表征 HTP 9 2009.pdf
├┈04 Microstructure of Austempered Ductile Iron 等温淬火球墨铸铁的微观组织.pdf
├┈05 Microstructure of Carbon- and Low-Alloy Steels 碳钢和低合金钢的微观组织.pdf
├┈06 Revealing Prior-Austenite Grain Boundaries (Presentation) 原始奥氏体晶界的揭示(演示).pdf
├┈Revealing Prior-Austenite Grain Boundaries in Heat Treated Steels 热处理钢中原始奥氏体晶界的揭示.pdf
◆11 METALLOGRAPHY QUANTITATIVE 定量金相学 [打开]
├┈01 Automating the JK Inclusion Analysis 自动化JK包裹体分析.pdf
├┈02 Computer-Aided Microstructural Analysis of Specialty Steels 特种钢的计算机辅助微观结构分析.pdf
├┈03 Examination of Some Grain Size Measurement Problems 检验一些粒度测量问题.pdf
├┈04 Image Analysis Measurements of Duplex Grain Structures 双晶粒结构的图像分析测量.pdf
├┈05 Introduction to Quantitative Metallography 定量金相学导论.pdf
├┈06 Introduction to Stereological Principles 立体原理概论.pdf
├┈07 Introduction to Stereology and Quantitative Metallography 立体与定量金相学概论 - ASTM E 1245.pdf
├┈08 Introduction to Stereology and Quantitative Metallography - Measurement of Grain Size 立体和定量金相学导论 - 晶粒尺寸的测量.pdf
├┈09 Introduction to Stereology and Quantitative Metallography - Measurement of Size and Shape 立体和定量金相学导论 - 尺寸和形状的测量.pdf
├┈10 Introduction to Stereology and Quantitative Metallography - Volume Fractions and Spacings 立体和定量金相学导论 - 体积分数和间距.pdf
├┈11 Measurement of Extremely Low Inclusion Contents by Image Analysis 通过图像分析极低夹杂物含量的测量.pdf
├┈12 Measurement of Grain Size 粒度测定.pdf
├┈13 Measurement of Grain Size in Twinned FCC Metals 双组分催化裂化金属中晶粒尺寸的测定.pdf
├┈14 Measurement of Grain Size in Twinned FCC Metals and Alloys 双组分催化裂化金属和合金中晶粒尺寸的测定.pdf
├┈15 Measurement of the Interlamellar Spacing of Pearlite 珠光体层间间距的测量.pdf
├┈16 Progress in Characterizing Materials Using Image Analysis 利用图像分析表征材料的研究进展.pdf
├┈17 Standards for Metallography 金相学标准.pdf
◆FAILURE ANALYSIS 失效分析 [打开]
├┈01 Conducting the Failure Analysis 进行失效分析.pdf
├┈02 Conducting the Failure Examination 进行失效检查.pdf
├┈03 Failure Analysis - Materials and Manufacturing Problems 失效分析-材料和制造问题.pdf
├┈04 Failure Analysis - Service Problems 失效分析-服务问题.pdf
├┈05 Failures of Locomotive Axles 机车车轴故障.pdf
├┈06 Failures of Tools and Dies 工具和模具的故障.pdf
├┈07 Fractography 断口金相检验.pdf
├┈08 Identifying the Cause of Tool and Die Failure 确定刀具和模具失效的原因.pdf
├┈09 Influence of Thermal Exposure on the Microstructure of the Lower Head of the Three Mile Island Unit 2 Reactor 热暴露对三里岛2号反应堆下封头微观结构的影响.pdf
├┈10 Metallographic Assesment of the Thermal Exposure to the Three Mile Island Unit 2 Reactor Lower Head 三里岛2号反应堆下封头热暴露的金相分析.pdf
├┈11 Metallographic Examination of Heavily Eroded Structural Steel from World Trade Center Buildings 1, 2 and 7 世界贸易中心1、2和7号楼严重腐蚀结构钢的金相检验.pdf
├┈12 Metallographic Techniques in Failure Analysis 应用于失效分析的金相技术.pdf
├┈13 Metallography and Failure Analysis 金相及失效分析.pdf
├┈14 Microstructural Analysis of Steel from the World Trade Center Buildings 7, and 1 or 2 世界贸易中心7号楼和1号楼或2号楼钢材的微观结构分析.pdf
├┈15 Microstructure and Hardness of Large Diameter Wire Ropes 大直径钢丝绳的金相组织和硬度.pdf
├┈16 Use of Failure Analysis in Materials Selection 应用于选材的失效分析.pdf
├┈17 Use of Light Microscopy in Failure Analysis 光镜在失效分析中的应用.pdf
├┈18 Visual Examination and Light Microscopy 视觉检查和光镜检查 Fractography Vol12.pdf
├┈19 When Fire Destroys 当遇到火灾破坏 NowYouKnow July2010 IH.pdf
共计12个目录,128个文件,大小1.92G字节.
|
本帖子中包含更多资源
您需要 登录 才可以下载或查看，没有账号？立即注册
x
评分
-
查看全部评分
|
[复制链接]
|小黑屋|手机版|Archiver|机械荟萃山庄
( 辽ICP备16011317号-1 )
发表于 2019-2-1 11:38:06
发表于 2019-2-1 12:20:40
